Features

• Isolated USB Transceiver: 7500V_RMS for 1 Minute
• UL-CSA Recognition Pending
• Reinforced Insulation
• USB 2.0 Full Speed and Low Speed Compatible
• Auto-Configuration of Bus Speed
• 4.4V to 36V V_BUS and V_BUS2 Operating Range
• 3.3V LDO Output Supply Signal References V_LO and V_LO2
• 50kV/μs Common Mode Transient Immunity
• ±20kV HBM ESD: on USB Interface Pins
• 1414V_PEAK Maximum Continuous Working Voltage
• 17.4mm Creepage Distance
• 22mm × 6.25mm Surface Mount BGA

Typical Application

Description

The LTM®2894 is a complete galvanically-isolated USB 2.0 compatible μModule® (micromodule) transceiver.

The LTM2894 is ideal for isolation in host, hub, bus splitter or peripheral device applications. It is compatible with USB 2.0 full speed (12Mbps) and low speed (1.5Mbps) operation. Automatic speed selection configures integrated pull-up resistors on the upstream port to match those sensed on the downstream device.

The isolator μModule technology uses coupled inductors to provide 7500V_RMS of isolation and 17.4mm of creepage between the upstream and downstream USB interface. This device is ideal for systems requiring isolated ground returns or large common mode voltage variations. Uninterrupted communication is guaranteed for common mode transients greater than 50kV/μs.

Enhanced ESD protection allows this part to withstand up to ±20kV (human body model) on the USB transceiver interface pins to local supplies and ±20kV through the isolation barrier to supplies without latchup or damage.