Datasheet
Design Note
Reliability Data
Product Selector Card
LT Journal
- April 2010 - Energy Harvester Produces Power from Local Environment, Eliminating Batteries in Wireless Sensors
- True Grid Independence: Robust Energy Harvesting System for Wireless Sensors Uses Piezoelectric Energy Harvesting Power Supply and Li-Poly Batteries with Shunt Charger
Press Release
- MicroGen’s piezo-MEMS vibration energy harvesters enable Linear Technology SmartMesh IP wireless sensor network
- Piezoelectric Energy Harvesting Power Supply
cad_symbol
Ad
ltspice
Features
- 950nA Input Quiescent Current (Output in Regulation – No Load)
- 450nA Input Quiescent Current in UVLO
- 2.7V to 20V Input Operating Range
- Integrated Low-Loss Full-Wave Bridge Rectifier
- Up to 100mA of Output Current
- Selectable Output Voltages of 1.8V, 2.5V, 3.3V, 3.6V
- High Efficiency Integrated Hysteretic Buck DC/DC
- Input Protective Shunt – Up to 25mA Pull-Down at VIN ≥ 20V
- Wide Input Undervoltage Lockout (UVLO) Range
- Available in 10-Lead MSE and 3mm × 3mm DFN Packages
Typical Application
Description
The LTC®3588-1 integrates a low-loss full-wave bridge rectifier with a high efficiency buck converter to form a complete energy harvesting solution optimized for high output impedance energy sources such as piezoelectric, solar, or magnetic transducers. An ultralow quiescent current undervoltage lockout (UVLO) mode with a wide hysteresis window allows charge to accumulate on an input capacitor until the buck converter can efficiently transfer a portion of the stored charge to the output. In regulation, the LTC3588-1 enters a sleep state in which both input and output quiescent currents are minimal. The buck converter turns on and off as needed to maintain regulation.
Four output voltages, 1.8V, 2.5V, 3.3V and 3.6V, are pin selectable with up to 100mA of continuous output current; however, the output capacitor may be sized to service a higher output current burst. An input protective shunt set at 20V enables greater energy storage for a given amount of input capacitance.
| Output Voltage (Switcher) | UVLO | Quiescent Current | |
|---|---|---|---|
| LTC3588-1 |
Selectable 1.8V, 2.5V, 3.3V or 3.6V |
4.04V(Rising) 2.87V(Falling) |
950nA (No Load) 450nA (UVLO) |
| LTC3588-2 |
Selectable 3.45V, 4.1V, 4.5V or 5V |
16V(Rising) 14V(Falling) |
1,500nA (No Load) 830nA (UVLO) |
3x3 DFN-10,MS-10E
Package Variations and Pricing
| Part Number | Package | Pins | Temp | Price (1-99) |
Price (1k)* |
|---|---|---|---|---|---|
| LTC3588EDD-1#PBF | DFN | 10 | E | $4.22 | $2.95 |
| LTC3588EDD-1#TRPBF | DFN | 10 | E | $3.01 | |
| LTC3588EDD-2#PBF | DFN | 10 | E | $4.22 | $2.95 |
| LTC3588EDD-2#TRPBF | DFN | 10 | E | $3.01 | |
| LTC3588EMSE-1#PBF | MSOP | 10 | E | $4.22 | $2.95 |
| LTC3588EMSE-1#TRPBF | MSOP | 10 | E | $3.01 | |
| LTC3588EMSE-2#PBF | MSOP | 10 | E | $4.22 | $2.95 |
| LTC3588EMSE-2#TRPBF | MSOP | 10 | E | $3.01 | |
| LTC3588IDD-1#PBF | DFN | 10 | I | $4.96 | $3.47 |
| LTC3588IDD-1#TRPBF | DFN | 10 | I | $3.53 | |
| LTC3588IDD-2#PBF | DFN | 10 | I | $4.96 | $3.47 |
| LTC3588IDD-2#TRPBF | DFN | 10 | I | $3.53 | |
| LTC3588IMSE-1#PBF | MSOP | 10 | I | $4.96 | $3.47 |
| LTC3588IMSE-1#TRPBF | MSOP | 10 | I | $3.53 | |
| LTC3588IMSE-2#PBF | MSOP | 10 | I | $4.96 | $3.47 |
| LTC3588IMSE-2#TRPBF | MSOP | 10 | I | $3.53 |
Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.
| Part Number | Description | Price | Documentation |
|---|---|---|---|
| DC1459B-A | LTC3588EMSE-1 Demo Board | Piezoelectric Generator Power Supply | $200.00 | |
| DC2042A | ENERGY HARVESTING (EH) MULTI-SOURCE DEMOBOARD | $200.00 | |
| DC2080A | Energy Harvesting (EH) Multi-Source Demo Board with Transducers | Contact Factory |