Datasheet
Application Note
Reliability Data
cad_symbol
Features
- Fully Enhances N-Channel Power MOSFETs
- 8µA IQ Standby Current
- 85µA IQ ON Current
- No External Charge Pump Capacitors
- 4.5V to 18V Supply Range
- Short-Circuit Protection
- Thermal Shutdown via PTC Thermistor
- Status Output Indicates Shutdown
- Available in 8-Pin SOIC
Typical Application
Description
The LTC1154 single high-side gate driver allows using low cost N-channel FETs for high-side switching applications. An internal charge pump boosts the gate drive voltage above the positive rail, fully enhancing an N-channel MOS switch with no external components. Micropower operation, with 8µA standby current and 85µA operating current, allows use in virtually all systems with maximum efficiency.
Included on chip is programmable over-current sensing. A time delay can be added to prevent false triggering on high in-rush current loads. An active high shutdown input is also provided and interfaces directly to a standard PTC thermistor for thermal shutdown. An open-drain output is provided to report switch status to the µP. An active low enable input is provided to control multiple switches in banks.
The LTC1154 is ailable in both 8-pin DIP and 8-pin SOIC packages.
N-8,SO-8
Package Variations and Pricing
| Part Number | Package | Pins | Temp | Price (1-99) |
Price (1k)* |
|---|---|---|---|---|---|
| LTC1154CN8#PBF | PDIP | 8 | C | $2.15 | $1.80 |
| LTC1154CS8#PBF | SO | 8 | C | $2.35 | $1.90 |
| LTC1154CS8#TRPBF | SO | 8 | C | $1.96 | |
| LTC1154HS8#PBF | SO | 8 | H | $3.36 | $2.35 |
| LTC1154HS8#TRPBF | SO | 8 | H | $2.41 | |
| LTC1154CN8 | PDIP | 8 | C | $4.30 | $3.60 |
| LTC1154CS8 | SO | 8 | C | $4.70 | $3.80 |
| LTC1154CS8#TR | SO | 8 | C | $3.92 | |
| LTC1154HS8 | SO | 8 | H | $6.72 | $4.70 |
Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.