Features

• Programmable Differential Gain via Two External Resistors
• Adjustable Output Common Mode Voltage
• Operates and Specified with 3V, 5V, ±5V Supplies
• 0.5dB Ripple 4th Order Lowpass Filter with 10MHz Cutoff
• 82dB S/N with 3V Supply and 2V_P-P Output
• Low Distortion, 2V_P-P , 800Ω Load
  1MHz: 88dBc 2nd, 97dBc 3rd
  5MHz: 74dBc 2nd, 77dBc 3rd
• Fully Differential Inputs and Outputs
• Compatible with Popular Differential Amplifier Pinouts
• SO-8 and DFN-12 Packages

Typical Application

Description

The LT6600-10 combines a fully differential amplifier with a 4th order 10MHz lowpass filter approximating a Chebyshev frequency response. Most differential amplifiers require many precision external components to tailor gain and bandwidth. In contrast, with the LT6600-10, two external resistors program differential gain, and the filter’s 10MHz cutoff frequency and passband ripple are internally set. The LT6600-10 also provides the necessary level shifting to set its output common mode voltage to accommodate the reference voltage requirements of A/Ds.

Using a proprietary internal architecture, the LT6600-10 integrates an antialiasing filter and a differential amplifier/driver without compromising distortion or low noise performance. At unity gain the measured in band signal-to- noise ratio is an impressive 82dB. At higher gains the input referred noise decreases so the part can process smaller input differential signals without significantly degrading the output signal-to-noise ratio.

The LT6600-10 also features low voltage operation. The differential design provides outstanding performance for a 2V_P-P signal level while the part operates with a single 3V supply.

For similar devices with other cutoff frequencies, refer to the LT6600-20, LT6600-15, LT6600-5 and LT6600-2.5.